PartsTable
Technical Data Sheet
Download PDF

628823 — IMPELLER,PUMP,CENTRIFUGAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

628823: IMPELLER,PUMP,CENTRIFUGAL.

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include diameter: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, overall_width: 0.856 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.080 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-375-0210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
628823
NSN: 5340-00-375-0210
NIINs: 003750210, 014635925
FSC: 5340 — Hardware, Commercial
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
diameter0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_width0.856 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.080 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.125 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.625 INCHES NOMINAL IN
NSN5340-00-375-0210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 628823 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.080 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.125 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.312 INCHES NOMINAL IN
OVERALL WIDTH0.856 INCHES NOMINAL IN
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.125 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER2.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
07-628823Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 628823?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 628823?
628823 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace 628823?
There is 1 known substitute for 628823: 07-628823. Substitute compatibility should be verified for your specific system.
What is the NSN for 628823?
628823 is cataloged in the U.S. Government catalog under NSN 5340-00-375-0210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 628823