PartsTable
Technical Data Sheet
Download PDF

6285C-SS-1224 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6285C-SS-1224: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, nut_style: CLINCH, nut_height: 0.625 INCHES NOMINAL IN, nut_diameter: 0.531 INCHES NOMINAL IN, pilot_length: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-416-7273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6285C-SS-1224
NSN: 5310-01-416-7273
FSC: 5310 — Nuts and Washers
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
nut_styleCLINCH
nut_height0.625 INCHES NOMINAL IN
nut_diameter0.531 INCHES NOMINAL IN
pilot_length0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.430 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.216 INCHES IN
thread_quantity_per_inch24
NSN5310-01-416-7273
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6285C-SS-1224 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.216 INCHES IN
•
NUT DIAMETER: 0.531 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.430 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.216 INCHES IN
NUT DIAMETER0.531 INCHES NOMINAL IN
PILOT DIAMETER0.430 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
PILOT LENGTH0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NUT HEIGHT0.625 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLECLINCH
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
59822-90532Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6285C-SS-1224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6285C-SS-1224?
6285C-SS-1224 is a NUT,PLAIN,CLINCH.
What parts can replace 6285C-SS-1224?
There is 1 known substitute for 6285C-SS-1224: 59822-90532. Substitute compatibility should be verified for your specific system.
What is the NSN for 6285C-SS-1224?
6285C-SS-1224 is cataloged in the U.S. Government catalog under NSN 5310-01-416-7273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6285C-SS-1224

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.