PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 628-20-24D
628-20-24D ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ELBOW,SWIVEL FLANGE TO HOSE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, flow_angle: 45.0 DEGREES, leg_length: 3.380 INCHES NOMINAL SECOND END IN, flange_shape: RECTANGULAR WITH HOLES FIRST END, nominal_width: 2.375 INCHES FIRST END IN, nominal_length: 2.375 INCHES FIRST END IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-541-2779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
628-20-24D
NSN: 4730-00-541-2779
FSC: 4730
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
flow_angle45.0 DEGREES
leg_length3.380 INCHES NOMINAL SECOND END IN
flange_shapeRECTANGULAR WITH HOLES FIRST END
nominal_width2.375 INCHES FIRST END IN
nominal_length2.375 INCHES FIRST END IN
connection_typeFLANGE FIRST END
connection_styleGRIPPING NIPPLE (NOSE) SECOND END
nominal_thickness0.297 INCHES FIRST END IN
surface_treatmentANODIZE OVERALL
bolt_hole_quantity4 FIRST END
flange_face_designRAISED SWIVEL FIRST END
NSN4730-00-541-2779
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 628-20-24D · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE SHAPE: RECTANGULAR WITH HOLES FIRST END
•
CONNECTION TYPE: THREADED EXTERNAL HOSE GRIPPING SECOND END
•
FLANGE FACE DESIGN: RAISED SWIVEL FIRST END
•
LEG LENGTH: 0.609 INCHES NOMINAL FIRST END IN
•
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED: 1.500 INCHES SECOND END IN
•
BOLT HOLE NOMINAL DIAMETER: 0.289 INCHES FIRST END IN
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE SHAPERECTANGULAR WITH HOLES FIRST END
CONNECTION TYPETHREADED EXTERNAL HOSE GRIPPING SECOND END
FLANGE FACE DESIGNRAISED SWIVEL FIRST END
LEG LENGTH0.609 INCHES NOMINAL FIRST END IN
CONNECTION TYPEFLANGE FIRST END
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED1.500 INCHES SECOND END IN
BOLT HOLE NOMINAL DIAMETER0.289 INCHES FIRST END IN
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-351,T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367,COMP 5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-325,T6 FED SPEC SINGLE MATERIAL RESPONSE NIPPLE
CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.812 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
312-4Interchangeable
interchangeable cross-reference
interchangeable
MS28740-4Interchangeable
interchangeable cross-reference
interchangeable
148-32005Interchangeable
interchangeable cross-reference
interchangeable
MS28740-5Interchangeable
interchangeable cross-reference
interchangeable
9490-32Interchangeable
interchangeable cross-reference
interchangeable
MS28747-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 628-20-24D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 628-20-24D?
628-20-24D is a ELBOW,SWIVEL FLANGE TO HOSE.
What parts can replace 628-20-24D?
There are 13 known substitutes for 628-20-24D: 312-4, MS28740-4, 148-32005 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 628-20-24D?
628-20-24D is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-541-2779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 628-20-24D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026