PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6276568
6276568 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER CHLOROPRENE CLASS CR AND ADHESIVE AND COBALT ALLOY OVERALL, hole_diameter: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.375 INCHES NOMINAL IN, overall_length: 1.375 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL, aperture_diameter: 1.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-9891, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6276568
NSN: 5330-00-290-9891
FSC: 5330
CAGE: S3715 — BOFORS AB (SWE)
SPECIFICATIONS
materialCOTTON AND RUBBER CHLOROPRENE CLASS CR AND ADHESIVE AND COBALT ALLOY OVERALL
hole_diameter0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.375 INCHES NOMINAL IN
overall_length1.375 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
aperture_diameter1.125 INCHES NOMINAL IN
outside_corner_radius0.156 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
material_document_and_classificationMIL-J-2829,TY 1,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_width1.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-290-9891
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6276568 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-J-2829,TY 1,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE CORNER RADIUS: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-J-2829,TY 1,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH1.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HARDNESS RATING60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE CORNER RADIUS0.156 INCHES NOMINAL IN
OVERALL WIDTH1.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
MATERIALCOTTON AND RUBBER CHLOROPRENE CLASS CR AND ADHESIVE AND COBALT ALLOY OVERALL
APERTURE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
16381Interchangeable
interchangeable cross-reference
interchangeable
4059276-8Interchangeable
interchangeable cross-reference
interchangeable
DN16381Interchangeable
interchangeable cross-reference
interchangeable
73834Interchangeable
interchangeable cross-reference
interchangeable
10-40450-18Interchangeable
interchangeable cross-reference
interchangeable
8014596Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6276568?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6276568?
6276568 is a GASKET.
What parts can replace 6276568?
There are 18 known substitutes for 6276568: 16381, 4059276-8, DN16381 and 15 more. Substitute compatibility should be verified for your specific system.
Is 6276568 still available?
6276568 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6276568

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026