PartsTable
Technical Data Sheet

626ZJ/C2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

626ZJ/C2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 6.00 MILLIMETERS NOMINAL MM, overall_width: 6.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-555-5293, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
626ZJ/C2
NSN: 3110-00-555-5293
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter6.00 MILLIMETERS NOMINAL MM
overall_width6.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter19.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationTIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-555-5293
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 626ZJ/C2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 19.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONTIGHT
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH6.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER19.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 8
I71138Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B20504-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
7036T1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10-7650Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7036T1214Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
36F2Q4A7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 626ZJ/C2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 626ZJ/C2?
626ZJ/C2 is a BEARING,BALL,ANNULAR.
What parts can replace 626ZJ/C2?
There are 8 known substitutes for 626ZJ/C2: I71138, B20504-32, 7036T1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 626ZJ/C2?
626ZJ/C2 is cataloged in the U.S. Government catalog under NSN 3110-00-555-5293. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 626ZJ/C2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.