PartsTable
Technical Data Sheet
Download PDF

626328 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

626328: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, loop_width: 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN, loop_length: 1.716 INCHES MINIMUM AND 1.798 INCHES MAXIMUM IN, overall_width: 0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN, style_designator: MULTIPLE LOOP, material_thickness: 0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-014-6170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
626328
NSN: 5340-00-014-6170
NIINs: 000146170, 008315634
FSC: 5340 — Hardware, Commercial
CAGE: S0554 — TOKYO JUDOGI KOGYO CO. (JPN)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
loop_width0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
loop_length1.716 INCHES MINIMUM AND 1.798 INCHES MAXIMUM IN
overall_width0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
style_designatorMULTIPLE LOOP
material_thickness0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.465 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.195 INCHES MINIMUM AND 1.225 INCHES MAXIMUM IN
NSN5340-00-014-6170
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 626328 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.465 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.195 INCHES MINIMUM AND 1.225 INCHES MAXIMUM IN
•
LOOP LENGTH: 1.716 INCHES MINIMUM AND 1.798 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
STYLE DESIGNATORMULTIPLE LOOP
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
MATERIAL THICKNESS0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.465 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.195 INCHES MINIMUM AND 1.225 INCHES MAXIMUM IN
LOOP LENGTH1.716 INCHES MINIMUM AND 1.798 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 626328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 626328?
626328 is a CLAMP,LOOP.
What is the NSN for 626328?
626328 is cataloged in the U.S. Government catalog under NSN 5340-00-014-6170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 626328

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.