The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.099 INCHES NOMINAL IN, overall_height: 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-089-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
626-095-001
NSN:5340-01-089-9031 FSC:5340 — Hardware, Commercial CAGE:26055 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV FLUID SYSTEMS DIVISION (USA)
SPECIFICATIONS
width
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length
0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.099 INCHES NOMINAL IN
overall_height
0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
special_features
COLOR GOLD
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
loop/holding_dimension
0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.411 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-01-089-9031
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LOOP/HOLDING DIMENSION: 0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.411 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
LENGTH
0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
LOOP/HOLDING DIMENSION
0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.411 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
SPECIAL FEATURES
COLOR GOLD
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
WIDTH
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 626-095-001?
626-095-001 is a CLIP,SPRING TENSION.
What parts can replace 626-095-001?
There is 1 known substitute for 626-095-001: 6016-11A. Substitute compatibility should be verified for your specific system.
What is the NSN for 626-095-001?
626-095-001 is cataloged in the U.S. Government catalog under NSN 5340-01-089-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.