PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 62567-10861
62567-10861 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL BACKING, seal_width: 0.563 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 3.375 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-354-3106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62567-10861
NSN: 5330-00-354-3106
FSC: 5330
CAGE: 81076 — JOHNSON C S CO INC (USA)
SPECIFICATIONS
materialSTEEL BACKING
seal_width0.563 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter3.375 INCHES NOMINAL IN
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
NSN5330-00-354-3106
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 62567-10861 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 3.375 INCHES NOMINAL IN
•
MATERIAL: STEEL BACKING
•
SEAL WIDTH: 0.563 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER3.375 INCHES NOMINAL IN
MATERIALSTEEL BACKING
SEAL WIDTH0.563 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
CONSTRUCTIONSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
32899Interchangeable
interchangeable cross-reference
interchangeable
2866Interchangeable
interchangeable cross-reference
interchangeable
4601-6Interchangeable
interchangeable cross-reference
interchangeable
35360338Interchangeable
interchangeable cross-reference
interchangeable
48-34Interchangeable
interchangeable cross-reference
interchangeable
50MS797-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 62567-10861?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62567-10861?
62567-10861 is a SEAL,PLAIN.
What parts can replace 62567-10861?
There are 14 known substitutes for 62567-10861: 32899, 2866, 4601-6 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62567-10861?
62567-10861 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-354-3106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62567-10861

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026