PartsTable
Technical Data Sheet
Download PDF

625635 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

625635: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.7500 INCHES NOMINAL IN, bore_diameter: 1.6875 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0780 INCHES NOMINAL IN, end_item_identification: MSC,CONTROL UNIT. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-791-9854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 625635
NSN: 3110-00-791-9854
NIINs: 007919854, 012871775, 013878027
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 73782 — TOWMOTOR CORP DALLAS PLANT SUB OF CATERPILLAR TRACTOR CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.7500 INCHES NOMINAL IN
bore_diameter1.6875 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0780 INCHES NOMINAL IN
end_item_identificationMSC,CONTROL UNIT
standard_tolerance_designationAFBMA CLASS 4
part_name_assigned_by_controlling_agencyMODULE,PROCESSOR
NSN3110-00-791-9854
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 625635 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0780 INCHES NOMINAL IN
•
CONE WIDTH: 1.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
BORE DIAMETER: 1.6875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0780 INCHES NOMINAL IN
CONE WIDTH1.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
BORE DIAMETER1.6875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A625635Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 625635?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 625635?
625635 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 625635?
There is 1 known substitute for 625635: A625635. Substitute compatibility should be verified for your specific system.
What is the NSN for 625635?
625635 is cataloged in the U.S. Government catalog under NSN 3110-00-791-9854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 625635

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.