PartsTable
Technical Data Sheet
Download PDF

6252B-SS-0832-7 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6252B-SS-0832-7: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, nut_style: SPLINE, nut_height: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, nut_diameter: 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, pilot_length: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-004-7355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6252B-SS-0832-7
NSN: 5310-00-004-7355
FSC: 5310 — Nuts and Washers
CAGE: 06540 — NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OVERALL
nut_styleSPLINE
nut_height0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
nut_diameter0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
pilot_length0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.226 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle45.0 DEGREES NOMINAL SECOND END
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.164 INCHES IN
NSN5310-00-004-7355
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6252B-SS-0832-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A276-55 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM FIRST END IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
COUNTERBORE DIAMETER: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM FIRST END IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A276-55 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM FIRST END IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
COUNTERBORE DIAMETER0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM FIRST END IN
PILOT DIAMETER0.226 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
PILOT LENGTH0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
364-1020P17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PIN101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7203680P012Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10049333-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1264-1274-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
70-201172-084Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6252B-SS-0832-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6252B-SS-0832-7?
6252B-SS-0832-7 is a NUT,PLAIN,SPLINE.
What parts can replace 6252B-SS-0832-7?
There are 6 known substitutes for 6252B-SS-0832-7: 364-1020P17, PIN101, 7203680P012 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6252B-SS-0832-7?
6252B-SS-0832-7 is cataloged in the U.S. Government catalog under NSN 5310-00-004-7355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6252B-SS-0832-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.