PartsTable
Technical Data Sheet
6246-42 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ATOMIZER,STARTING FLUID is a the manufacturer industrial component. Key specifications include phase: SINGLE INPUT, duty_cycle: CONTINUOUS, temp_rating: 50.0 OPERATING CELSIUS, current_type: AC INPUT, power_rating: 8.0300 WATTS OUTPUT, winding_type: SYNCHRONOUS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-058-2874, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6246-42
NSN: 5330-00-058-2874
FSC: 5330
CAGE: 02708 — AGE LOGISTICS CORPORATION (USA)
SPECIFICATIONS
phaseSINGLE INPUT
duty_cycleCONTINUOUS
temp_rating50.0 OPERATING CELSIUS
current_typeAC INPUT
power_rating8.0300 WATTS OUTPUT
winding_typeSYNCHRONOUS
overall_width1.812 INCHES IN
cooling_methodAMBIENT AIR
overall_height1.812 INCHES IN
overall_length3.437 INCHES IN
shaft_diameter0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM SINGLE END IN
mounting_methodPAD
NSN5330-00-058-2874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6246-42 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALLEATHER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
AN6246PC23Interchangeable
interchangeable cross-reference
interchangeable
1283-218Interchangeable
interchangeable cross-reference
interchangeable
P793Interchangeable
interchangeable cross-reference
interchangeable
MS35803-110Interchangeable
interchangeable cross-reference
interchangeable
2216LS-110Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-5521Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6246-42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6246-42?
6246-42 is a ATOMIZER,STARTING FLUID.
What parts can replace 6246-42?
There are 33 known substitutes for 6246-42: AN6246PC23, 1283-218, P793 and 30 more. Substitute compatibility should be verified for your specific system.
Is 6246-42 still available?
6246-42 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6246-42