PartsTable
Technical Data Sheet
Download PDF

624361 — RESISTOR,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

624361: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: WOOL SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, electrical_resistance: 1.300 KILOHMS, housing_bore_diameter: 3.500 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-359-4366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 624361
NSN: 5330-00-359-4366
NIINs: 003594366, 012704418, 013834783
FSC: 5330 — Packing and Gasket Materials
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialWOOL SEALING ELEMENT A
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
electrical_resistance1.300 KILOHMS
housing_bore_diameter3.500 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
end_item_identificationAIR CONDITIONER, MODEL FTD-100
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
resistance_tolerance_in_percent-1.000 TO 1.000
power_dissipation_rating_in_watts0.125 FREE AIR
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-359-4366
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 624361 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT B
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.750 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER3.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT B
MATERIALWOOL SEALING ELEMENT A
SUBSTITUTES & CROSS-REFERENCES 4
25147SReference document
Same NSN cross-reference
Reference document — Secondary reference
07-624361Reference document
Same NSN cross-reference
Reference document — Secondary reference
17643AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
1672879Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 624361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 624361?
624361 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 624361?
There are 4 known substitutes for 624361: 25147S, 07-624361, 17643A and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 624361?
624361 is cataloged in the U.S. Government catalog under NSN 5330-00-359-4366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 624361