PartsTable
Technical Data Sheet
Download PDF

6242930-135 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6242930-135: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, outside_diameter: 0.209 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN, material_document_and_classification: 66 FED STD ALL MATERIAL RESPONSES OVERALL, surface_treatment_document_and_classification: MIL-C-81751,TYPE 1,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-296-5357, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6242930-135
NSN: 5310-01-296-5357
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
hole_diameter0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
outside_diameter0.209 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationMIL-C-81751,TYPE 1,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-296-5357
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6242930-135 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-81751,TYPE 1,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
COLOR: GRAY/GREY OVERALL
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-81751,TYPE 1,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.209 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
COLORGRAY/GREY OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6242930-135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6242930-135?
6242930-135 is a WASHER,LOCK.
What is the NSN for 6242930-135?
6242930-135 is cataloged in the U.S. Government catalog under NSN 5310-01-296-5357. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6242930-135

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.