PartsTable
Technical Data Sheet
Download PDF

623041 — SLEEVE,SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

623041: SLEEVE,SPRING.

The SLEEVE,SPRING is a the manufacturer industrial component. Key specifications include end_item_identification: CH-46E AIRCRAFT, general_characteristics_item_description: ANODIZE VS1-3-1-1 FSCM 62983,1.490 IN. MIN,1.491 IN.

MAX OD,1.355 IN. ID IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-1572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
623041
NSN: 5330-00-582-1572
NIINs: 005821572, 010218631
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
end_item_identificationCH-46E AIRCRAFT
general_characteristics_item_descriptionANODIZE VS1-3-1-1 FSCM 62983,1.490 IN. MIN,1.491 IN. MAX OD,1.355 IN. ID IN
NSN5330-00-582-1572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 623041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
NONDEFINITIVE SPEC/STD DATA: 3 CLASS
•
CENTER HOLE DIAMETER: 7.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
NONDEFINITIVE SPEC/STD DATA3 CLASS
CENTER HOLE DIAMETER7.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
120R0C41CLASS3Reference document
Same NSN cross-reference
Reference document — Secondary reference
980050Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 623041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 623041?
623041 is a SLEEVE,SPRING.
What parts can replace 623041?
There are 2 known substitutes for 623041: 120R0C41CLASS3, 980050. Substitute compatibility should be verified for your specific system.
What is the NSN for 623041?
623041 is cataloged in the U.S. Government catalog under NSN 5330-00-582-1572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 623041