PartsTable
Technical Data Sheet
PartsTable / MRO / 6228
6228 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, bore_style: PLAIN BOTH ENDS, drive_type: HEXAGON, flow_angle: 90.0 DEGREES, head_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-3266, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6228
NSN: 5330-00-202-3266
FSC: 5330
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
bore_stylePLAIN BOTH ENDS
drive_typeHEXAGON
flow_angle90.0 DEGREES
head_styleROUND
leg_length1.500 INCHES NOMINAL ALL ENDS IN
teeth_typeSTRAIGHT
body_length0.625 INCHES NOMINAL IN
head_height0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
pitch_angle41.5000 DEGREES
shaft_styleROUND
NSN5330-00-202-3266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6228 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: SOLID
•
CROSS-SECTIONAL WIDTH: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.281 INCHES NOMINAL IN
•
MATERIAL: CORK
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODSOLID
CROSS-SECTIONAL WIDTH0.156 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.281 INCHES NOMINAL IN
MATERIALCORK
MATERIALCORK
CROSS-SECTIONAL HEIGHT0.281 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CROSS-SECTIONAL WIDTH0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
9975190-2Interchangeable
interchangeable cross-reference
interchangeable
B16-22-1951Interchangeable
interchangeable cross-reference
interchangeable
6228Interchangeable
interchangeable cross-reference
interchangeable
110584Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
AN3066-28Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6228?
6228 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6228?
There are 13 known substitutes for 6228: 9975190-2, B16-22-1951, 6228 and 10 more. Substitute compatibility should be verified for your specific system.
Is 6228 still available?
6228 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6228

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026