PartsTable / O-RING / 622737B46A
622737B46A
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.020 INCHES NOMINAL IN, center_hole_diameter: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-7084, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
622737B46A
NSN: 5331-00-582-7084 FSC: 5331 — O-RINGCAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 3.020 INCHES NOMINAL IN center_hole_diameter 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN cross-sectional_height 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN NSN 5331-00-582-7084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 622737B46A
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
• TEMP RATING: -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CENTER HOLE DIAMETER: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 3.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN TEMP RATING -35.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CENTER HOLE DIAMETER 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN OUTSIDE DIAMETER 3.020 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2334 Interchangeable interchangeable cross-reference
interchangeable
905 Interchangeable interchangeable cross-reference
interchangeable
90F Interchangeable interchangeable cross-reference
interchangeable
8111B0440-3 Interchangeable interchangeable cross-reference
interchangeable
3411-1518-4636 Interchangeable interchangeable cross-reference
interchangeable
MILL51336 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 622737B46A?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 622737B46A?
622737B46A is a O-RING.
What parts can replace 622737B46A?
There are 22 known substitutes for 622737B46A: 2334, 905, 90F and 19 more. Substitute compatibility should be verified for your specific system.
Is 622737B46A still available?
622737B46A is currently cancelled.
Request a Quote — 622737B46A