PartsTable
Technical Data Sheet
Download PDF

6227342-1 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6227342-1: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.500 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 0.621 INCHES NOMINAL IN, overall_length: 1.305 INCHES NOMINAL IN, surface_treatment: UNABLE TO DECODE, first_surface_hole_size: 0.145 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-1089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6227342-1
NSN: 5340-01-171-1089
FSC: 5340 — Hardware, Commercial
CAGE: 03640 — LOCKHEED MARTIN CORPORATION DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
height0.500 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width0.621 INCHES NOMINAL IN
overall_length1.305 INCHES NOMINAL IN
surface_treatmentUNABLE TO DECODE
first_surface_hole_size0.145 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
second_surface_hole_size0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
first_surface_hole_quantity2
second_surface_hole_quantity2
NSN5340-01-171-1089
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6227342-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST SURFACE HOLE SIZE: 0.145 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
•
SECOND SURFACE HOLE SIZE: 0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
•
HEIGHT: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MATERIAL: UNABLE TO DECODE
•
SECOND SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.305 INCHES NOMINAL IN
OVERALL WIDTH0.621 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.145 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
SECOND SURFACE HOLE SIZE0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
HEIGHT0.500 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
SECOND SURFACE HOLE QUANTITY2
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6227342-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6227342-1?
6227342-1 is a STRIKE,CATCH.
What is the NSN for 6227342-1?
6227342-1 is cataloged in the U.S. Government catalog under NSN 5340-01-171-1089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6227342-1