PartsTable
Technical Data Sheet
Download PDF

62270-2 — VALVE,SADDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

62270-2: VALVE,SADDLE.

The VALVE,SADDLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, connection_type: UNTHREADED INTERNAL TUBE FIRST END, special_features: INCLUDES MTG BOLTS AND GASKETS, flow_control_device: DISKDISK, nominal_outside_diameter_tube_accommodated: 1.375 INCHES FIRST END IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-826-9927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62270-2
NSN: 5331-00-826-9927
NIINs: 008269927, 014086974
FSC: 5331 — O-ring
CAGE: 73160 — FEDERAL-MOGUL CORP POWERTRAIN PRODUCTS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
connection_typeUNTHREADED INTERNAL TUBE FIRST END
special_featuresINCLUDES MTG BOLTS AND GASKETS
flow_control_deviceDISKDISK
nominal_outside_diameter_tube_accommodated1.375 INCHES FIRST END IN
NSN5331-00-826-9927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 62270-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.285 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.285 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE250 MAXIMUM
CENTER HOLE DIAMETER0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
SAE-AS29561Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS29561-007Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PRP902-2-142-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S8057K2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
100T056Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-007 N4771-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 62270-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62270-2?
62270-2 is a VALVE,SADDLE.
What parts can replace 62270-2?
There are 8 known substitutes for 62270-2: SAE-AS29561, MS29561-007, PRP902-2-142-7 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62270-2?
62270-2 is cataloged in the U.S. Government catalog under NSN 5331-00-826-9927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62270-2