PartsTable
Technical Data Sheet
PartsTable / MRO / 6227-10
6227-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include shape: RECTANGULAR OR SQUARE, body_style: RECTANGULAR, body_width: 0.312 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.312 INCHES NOMINAL IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-019-7510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6227-10
NSN: 5330-00-019-7510
FSC: 5330
CAGE: 96922 — AMERICAN BILTRITE INC TAPE PRODUCTS DIV (USA)
SPECIFICATIONS
shapeRECTANGULAR OR SQUARE
body_styleRECTANGULAR
body_width0.312 INCHES NOMINAL IN
body_height0.375 INCHES NOMINAL IN
body_length0.312 INCHES NOMINAL IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
mounting_methodSCREW
terminal_length0.250 INCHES MINIMUM IN
fragility_factorMODERATELY DELICATE
section_quantity1
special_featuresWEAPON SYSTEM ESSENTIAL
features_providedHUMIDITY PROOF
NSN5330-00-019-7510
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6227-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
N10017-0112-001Interchangeable
interchangeable cross-reference
interchangeable
MS28775-112Interchangeable
interchangeable cross-reference
interchangeable
112-846-70Interchangeable
interchangeable cross-reference
interchangeable
2100-2991Interchangeable
interchangeable cross-reference
interchangeable
62-271-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6227-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6227-10?
6227-10 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6227-10?
There are 5 known substitutes for 6227-10: N10017-0112-001, MS28775-112, 112-846-70 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6227-10?
6227-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-019-7510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6227-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026