PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 622546
622546 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include terminal_type: WIRE LEAD, overall_length: 0.756 INCHES NOMINAL IN, inside_diameter: 0.320 INCHES NOMINAL IN, overall_diameter: 1.098 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
622546
NSN: 5330-00-285-9464
FSC: 5330
CAGE: 38018 — MANITOWOC ENGINEERING CO DIVISION OF THE MANITOWOC CO INC (USA)
SPECIFICATIONS
terminal_typeWIRE LEAD
overall_length0.756 INCHES NOMINAL IN
inside_diameter0.320 INCHES NOMINAL IN
overall_diameter1.098 INCHES NOMINAL IN
terminal_quantity5
main_pole_quantity2
NSN5330-00-285-9464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 622546 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
ACCOMMODATED SHAFT DIAMETER: 9.500 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 11.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
ACCOMMODATED SHAFT DIAMETER9.500 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER11.500 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
11916-1Interchangeable
interchangeable cross-reference
interchangeable
645-0107Interchangeable
interchangeable cross-reference
interchangeable
11916Interchangeable
interchangeable cross-reference
interchangeable
B2006-4BInterchangeable
interchangeable cross-reference
interchangeable
95050Interchangeable
interchangeable cross-reference
interchangeable
609Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 622546?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 622546?
622546 is a SEAL,PLAIN ENCASED.
What parts can replace 622546?
There are 13 known substitutes for 622546: 11916-1, 645-0107, 11916 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 622546?
622546 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 622546

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026