PartsTable
Technical Data Sheet
Download PDF

6212630 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6212630: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include plate_width: 2.880 INCHES NOMINAL IN, plate_length: 4.940 INCHES NOMINAL IN, hole_diameter: 0.196 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, inside_length: 4.500 INCHES NOMINAL IN, stock_diameter: 0.310 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-326-9627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6212630
NSN: 5340-01-326-9627
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
plate_width2.880 INCHES NOMINAL IN
plate_length4.940 INCHES NOMINAL IN
hole_diameter0.196 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
inside_length4.500 INCHES NOMINAL IN
stock_diameter0.310 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
style_designatorRECTANGULAR OPEN
mounting_plate_styleRECTANGULAR
NSN5340-01-326-9627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6212630 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE LENGTH: 4.940 INCHES NOMINAL IN
•
INSIDE LENGTH: 4.500 INCHES NOMINAL IN
•
MOUNTING METHOD: MOUNTING PLATE
•
PLATE WIDTH: 2.880 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR OPEN
•
STOCK DIAMETER: 0.310 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.196 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE LENGTH4.940 INCHES NOMINAL IN
INSIDE LENGTH4.500 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
PLATE WIDTH2.880 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR OPEN
STOCK DIAMETER0.310 INCHES NOMINAL IN
MOUNTING PLATE STYLERECTANGULAR
HOLE DIAMETER0.196 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
1885AS125Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5340PL0850789Reference document
Same NSN cross-reference
Reference document — Informative reference only
H-946-LS-2-RGZEReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6212630?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6212630?
6212630 is a HANDLE,BAIL.
What parts can replace 6212630?
There are 3 known substitutes for 6212630: 1885AS125, 5340PL0850789, H-946-LS-2-RGZE. Substitute compatibility should be verified for your specific system.
What is the NSN for 6212630?
6212630 is cataloged in the U.S. Government catalog under NSN 5340-01-326-9627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6212630

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.