PartsTable
Technical Data Sheet
Download PDF

620C014A01 — SEAL RING,METAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

620C014A01: SEAL RING,METAL.

The SEAL RING,METAL is a the manufacturer industrial component. Key specifications include ring_style: CONTRACTING CONCENTRIC, joint_style: VERTICAL JOINT, overall_width: 1.0462 INCHES NOMINAL IN, inside_diameter: 7.270 INCHES NOMINAL IN, radial_wall_thickness: 0.0615 INCHES NOMINAL IN, material_document_and_classification: -1L-C-15345 MIL SPEC ALL MATERIAL RESPONSES EXPANDER. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-949-1498, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
620C014A01
NSN: 5330-00-949-1498
FSC: 5330 — Packing and Gasket Materials
CAGE: 90099 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MARINE SYSTEMS (USA)
SPECIFICATIONS
ring_styleCONTRACTING CONCENTRIC
joint_styleVERTICAL JOINT
overall_width1.0462 INCHES NOMINAL IN
inside_diameter7.270 INCHES NOMINAL IN
radial_wall_thickness0.0615 INCHES NOMINAL IN
material_document_and_classification-1L-C-15345 MIL SPEC ALL MATERIAL RESPONSES EXPANDER
NSN5330-00-949-1498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 620C014A01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: -1L-C-15345 MIL SPEC ALL MATERIAL RESPONSES EXPANDER
•
JOINT STYLE: VERTICAL JOINT
•
INSIDE DIAMETER: 7.270 INCHES NOMINAL IN
•
RADIAL WALL THICKNESS: 0.0615 INCHES NOMINAL IN
•
RING STYLE: CONTRACTING CONCENTRIC
TECHNICAL CHARACTERISTICS
OVERALL WIDTH1.0462 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION-1L-C-15345 MIL SPEC ALL MATERIAL RESPONSES EXPANDER
JOINT STYLEVERTICAL JOINT
INSIDE DIAMETER7.270 INCHES NOMINAL IN
RADIAL WALL THICKNESS0.0615 INCHES NOMINAL IN
RING STYLECONTRACTING CONCENTRIC
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
715J059PC9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
672J081PC15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 620C014A01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 620C014A01?
620C014A01 is a SEAL RING,METAL.
What parts can replace 620C014A01?
There are 2 known substitutes for 620C014A01: 715J059PC9, 672J081PC15. Substitute compatibility should be verified for your specific system.
What is the NSN for 620C014A01?
620C014A01 is cataloged in the U.S. Government catalog under NSN 5330-00-949-1498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 620C014A01