PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6207 DDU C3E 1VS3
6207 DDU C3E 1VS3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 17.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-126-1288, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6207 DDU C3E 1VS3
NSN: 3110-01-126-1288
FSC: 3110
CAGE: 53035 — NSK CORP BEARING DIV (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width17.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresESPECIALLY CLEAN,SMOOTH AND QUIET RUNNING
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
NSN3110-01-126-1288
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6207 DDU C3E 1VS3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL BALL
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
SEAL QUANTITY2
SPECIAL FEATURESESPECIALLY CLEAN,SMOOTH AND QUIET RUNNING
BEARING SEAL TYPECONTACT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
053390Interchangeable
interchangeable cross-reference
interchangeable
MX053390Interchangeable
interchangeable cross-reference
interchangeable
5053390Interchangeable
interchangeable cross-reference
interchangeable
P207NPPFS50000Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6207 DDU C3E 1VS3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6207 DDU C3E 1VS3?
6207 DDU C3E 1VS3 is a BEARING,BALL,ANNULAR.
What parts can replace 6207 DDU C3E 1VS3?
There are 4 known substitutes for 6207 DDU C3E 1VS3: 053390, MX053390, 5053390 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6207 DDU C3E 1VS3?
6207 DDU C3E 1VS3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-126-1288. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6207 DDU C3E 1VS3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026