PartsTable
Technical Data Sheet
Download PDF

620371 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

620371: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include end_item_identification: M22520/5-01 CRIMP TOOL, specification/standard_data: 0U583-SAE AS22520 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD, general_characteristics_item_description: DOUBLE CLOSURE; 0.324 IN. HEX (A CLOSURE) AND 0.100 IN.

HEX (B CLOSURE) IN. This part is cataloged in the U.S. Government catalog under NSN 5315-00-081-7955, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
620371
NSN: 5315-00-081-7955
NIINs: 000817955, 001003111, 011847992
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 01417 — GENERAL DYNAMICS LAND SYSTEMS INC. (USA)
SPECIFICATIONS
end_item_identificationM22520/5-01 CRIMP TOOL
specification/standard_data0U583-SAE AS22520 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
general_characteristics_item_descriptionDOUBLE CLOSURE; 0.324 IN. HEX (A CLOSURE) AND 0.100 IN. HEX (B CLOSURE) IN
NSN5315-00-081-7955
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 620371 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.4370 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.250 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.4370 INCHES NOMINAL IN
PIN OVERALL LENGTH1.250 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURESOD BEVELED
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
67A247B94Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
67A247J1PC104Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 620371?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 620371?
620371 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 620371?
There are 2 known substitutes for 620371: 67A247B94, 67A247J1PC104. Substitute compatibility should be verified for your specific system.
What is the NSN for 620371?
620371 is cataloged in the U.S. Government catalog under NSN 5315-00-081-7955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 620371