PartsTable
Technical Data Sheet
Download PDF

62021DB-2 — SHAFT,MAIN ASSEMBLY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

62021DB-2: SHAFT,MAIN ASSEMBLY.

The SHAFT,MAIN ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 150.00 MILLIMETERS NOMINAL MM, overall_width: 76.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-277-0193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 62021DB-2
NSN: 3110-00-277-0193
NIINs: 002770193, 003029239
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70312 — ALLIED PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter150.00 MILLIMETERS NOMINAL MM
overall_width76.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
overall_outside_diameter235.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-277-0193
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 62021DB-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 235.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH76.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER235.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER150.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
130RDB0111B314A75C0000BReference document
Same NSN cross-reference
Reference document — Secondary reference
130RDB0111B315B75C0000BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 62021DB-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62021DB-2?
62021DB-2 is a SHAFT,MAIN ASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 62021DB-2?
There are 2 known substitutes for 62021DB-2: 130RDB0111B314A75C0000B, 130RDB0111B315B75C0000B. Substitute compatibility should be verified for your specific system.
What is the NSN for 62021DB-2?
62021DB-2 is cataloged in the U.S. Government catalog under NSN 3110-00-277-0193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62021DB-2