PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6201048
6201048 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.738 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 5.625 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.688 INCHES NOMINAL IN, bolt_circle_diameter: 4.875 INCHES NOMINAL IN, end_item_identification: 3825-01-577-2713 DISTRIBUTOR, WATER, TANK TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-588-6325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6201048
NSN: 5330-01-588-6325
FSC: 5330
CAGE: 80195 — ED ETNYRE & CO (USA)
SPECIFICATIONS
hole_diameter0.738 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter5.625 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.688 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter4.875 INCHES NOMINAL IN
end_item_identification3825-01-577-2713 DISTRIBUTOR, WATER, TANK TYPE
cross-sectional_thickness0.094 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyFLANGE GASKET, 3.00 CORK-BUNA-N
NSN5330-01-588-6325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6201048 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
BOLT CIRCLE DIAMETER: 4.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.688 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.738 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
BOLT CIRCLE DIAMETER4.875 INCHES NOMINAL IN
APERTURE DIAMETER3.688 INCHES NOMINAL IN
OUTSIDE DIAMETER5.625 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
END ITEM IDENTIFICATION3825-01-577-2713 DISTRIBUTOR, WATER, TANK TYPE
PART NAME ASSIGNED BY CONTROLLING AGENCYFLANGE GASKET, 3.00 CORK-BUNA-N
HOLE DIAMETER0.738 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY8
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
32491Interchangeable
interchangeable cross-reference
interchangeable
YAV10L36Interchangeable
interchangeable cross-reference
interchangeable
C36Interchangeable
interchangeable cross-reference
interchangeable
52660-TABPC18Interchangeable
interchangeable cross-reference
interchangeable
52660-9ITEM18Interchangeable
interchangeable cross-reference
interchangeable
63750-2 ITEM 14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6201048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6201048?
6201048 is a GASKET.
What parts can replace 6201048?
There are 8 known substitutes for 6201048: 32491, YAV10L36, C36 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6201048?
6201048 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-588-6325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6201048

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026