PartsTable
Technical Data Sheet

6200LLX/5C — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

6200LLX/5C: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 10.00 MILLIMETERS NOMINAL MM, overall_width: 9.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, bearing_seal_type: CONTACT. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-017-5579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6200LLX/5C
NSN: 3110-01-017-5579
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53035 — NSK CORP BEARING DIV (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter10.00 MILLIMETERS NOMINAL MM
overall_width9.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
bearing_seal_typeCONTACT
overall_outside_diameter30.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-01-017-5579
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6200LLX/5C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
OVERALL WIDTH9.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER30.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 3
3110010175579Reference document
Same NSN cross-reference
Reference document — Informative reference only
692981Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X3433Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 6200LLX/5C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6200LLX/5C?
6200LLX/5C is a BEARING,BALL,ANNULAR.
What parts can replace 6200LLX/5C?
There are 3 known substitutes for 6200LLX/5C: 3110010175579, 692981, X3433. Substitute compatibility should be verified for your specific system.
What is the NSN for 6200LLX/5C?
6200LLX/5C is cataloged in the U.S. Government catalog under NSN 3110-01-017-5579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6200LLX/5C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.