PartsTable
Technical Data Sheet
PartsTable / MRO / 62-713
62-713 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, body_width: 3.375 INCHES NOMINAL IN, body_height: 4.312 INCHES NOMINAL IN, body_length: 1.040 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-035-9936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 62-713
NSN: 4820-00-035-9936
FSC: 4820
CAGE: 86184 — GRISWOLD INDUSTRIES DBA CLA-VAL CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
body_width3.375 INCHES NOMINAL IN
body_height4.312 INCHES NOMINAL IN
body_length1.040 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBEARING SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.688 INCHES NOMINAL IN
thread_class2A SINGLE THREADED PORTION A
actuator_typeDOUBLE ENDED SHAFT
body_diameter1.875 INCHES NOMINAL IN
NSN4820-00-035-9936
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 62-713 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY INSIDE DIAMETER: 1.000 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.362 INCHES NOMINAL SINGLE THREADED PORTION IN
•
THREAD SERIES DESIGNATOR: UN SINGLE THREADED PORTION
•
FLANGE SEAT TO DISK END HEIGHT: 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
THREAD CLASS: 2A SINGLE THREADED PORTION A
•
SEATING SURFACE SHAPE: ANGULAR
•
UNDER FLANGE HEIGHT: 0.719 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY INSIDE DIAMETER1.000 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
SPECIAL FEATURESHEX FLANGE
THREAD LENGTH0.362 INCHES NOMINAL SINGLE THREADED PORTION IN
THREAD SERIES DESIGNATORUN SINGLE THREADED PORTION
FLANGE SEAT TO DISK END HEIGHT0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
THREAD CLASS2A SINGLE THREADED PORTION A
SEATING SURFACE SHAPEANGULAR
UNDER FLANGE HEIGHT0.719 INCHES NOMINAL IN
NOMINAL THREAD SIZE1.250 INCHES SINGLE THREADED PORTION IN
SEAT ANGLE IN DEG4.083 MINIMUM AND 5.083 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
62713Interchangeable
interchangeable cross-reference
interchangeable
4001639Interchangeable
interchangeable cross-reference
interchangeable
12A6142Interchangeable
interchangeable cross-reference
interchangeable
170-168Interchangeable
interchangeable cross-reference
interchangeable
1277386Interchangeable
interchangeable cross-reference
interchangeable
6271Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 62-713?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62-713?
62-713 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 62-713?
There are 8 known substitutes for 62-713: 62713, 4001639, 12A6142 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62-713?
62-713 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-035-9936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62-713

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026