PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 62-6059-03-901
62-6059-03-901 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.042 INCHES NOMINAL IN, diameter: 0.125 INCHES NOMINAL IN, material: STEEL COMP 302 OVERALL, head_style: FLAT, chamfer_length: 0.031 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-523-6450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62-6059-03-901
NSN: 5315-00-523-6450
FSC: 5315
CAGE: 81860 — HUTCHINSON AEROSPACE & INDUSTRY, INC. DBA BARRY WRIGHT CORP (USA)
SPECIFICATIONS
height0.042 INCHES NOMINAL IN
diameter0.125 INCHES NOMINAL IN
materialSTEEL COMP 302 OVERALL
head_styleFLAT
chamfer_length0.031 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.250 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.594 INCHES NOMINAL IN
first_hole_diameter0.067 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-523-6450
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 62-6059-03-901 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OVERALL
•
DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
CHAMFER LENGTH0.031 INCHES NOMINAL IN
HEAD STYLEFLAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OVERALL
DIAMETER0.125 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.078 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
755Interchangeable
interchangeable cross-reference
interchangeable
3F7183Interchangeable
interchangeable cross-reference
interchangeable
9N18186Interchangeable
interchangeable cross-reference
interchangeable
160920Interchangeable
interchangeable cross-reference
interchangeable
125-3788Interchangeable
interchangeable cross-reference
interchangeable
227-1247P5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 62-6059-03-901?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62-6059-03-901?
62-6059-03-901 is a PIN,STRAIGHT,HEADED.
What parts can replace 62-6059-03-901?
There are 18 known substitutes for 62-6059-03-901: 755, 3F7183, 9N18186 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62-6059-03-901?
62-6059-03-901 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-523-6450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62-6059-03-901

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026