PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 62-43
62-43 ✓ Verified by PartsTable
Ariete · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Top-level design, capacity and features distinguish the 6243 model that, thanks to the bi-directional ceramic plate and a 2200W power, is the ideal iron for a professional, effective and fast ironing. The equipment is completed by the 320ml tank, the ergonomic soft-touch handle, the autocleaning system, the anti-dripping system and the anti-limestone system. Essential and powerful, responds to the expectations of the most demanding users.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-053-5387, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
62-43
NSN: 5330-00-053-5387
FSC: 5330
CAGE: 18565 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CHOMERICS DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
duty_typeCONTINUOUS
base_style2-PIN
body_styleBUSHING MOUNT
body_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
bulb_styleMR (ARBITARY DESIGNATION FOR LAMP WITH INTEGRAL REFLECTOR)
body_height1.000 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
body_length1.346 INCHES MAXIMUM IN
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
body_diameter0.875 INCHES NOMINAL IN
overall_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
actuator_styleROUND
NSN5330-00-053-5387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 62-43 MFR: Ariete ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.093 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.060 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
APERTURE LENGTH: 2.444 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.630 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.093 INCHES NOMINAL IN
OVERALL WIDTH0.854 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.060 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
APERTURE LENGTH2.444 INCHES NOMINAL IN
APERTURE WIDTH0.630 INCHES NOMINAL IN
OVERALL LENGTH2.670 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AJ1043703530HA0Interchangeable
interchangeable cross-reference
interchangeable
J221P243Interchangeable
interchangeable cross-reference
interchangeable
MS9388-243Interchangeable
interchangeable cross-reference
interchangeable
6243Interchangeable
interchangeable cross-reference
interchangeable
171549Interchangeable
interchangeable cross-reference
interchangeable
60521XInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 62-43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62-43?
62-43 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Ariete.
What parts can replace 62-43?
There are 18 known substitutes for 62-43: AJ1043703530HA0, J221P243, MS9388-243 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62-43?
62-43 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-053-5387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62-43

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026