PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 62-40-211-2
62-40-211-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH,RIM is a the manufacturer industrial component. Key specifications include width: 3.35 INCHES NOMINAL IN, height: 1.58 INCHES NOMINAL IN, length: 2.20 INCHES NOMINAL IN, material: ZINC HOUSING, action_type: SPRING, operation_method: LEVER LATCH BAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-522-7349, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62-40-211-2
NSN: 5340-01-522-7349
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
width3.35 INCHES NOMINAL IN
height1.58 INCHES NOMINAL IN
length2.20 INCHES NOMINAL IN
materialZINC HOUSING
action_typeSPRING
operation_methodLEVER LATCH BAR
special_featuresPOLISHED CHROME OVERALL
style_designatorRECTANGULAR
features_providedPAWL ADJUSTABILITY
mounting_hole_quantity1
supplementary_featuresSEE TECH DATA SHEET 62 COMPRESSION LATCH ON WEBSITE WWW.SOUTHCO.COM/62 FOR ADDITIONAL INFORMATION
end_item_identificationCONSOLE GSE
NSN5340-01-522-7349
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 62-40-211-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 3.35 INCHES NOMINAL IN
•
ACTION TYPE: SPRING
•
MOUNTING HOLE QUANTITY: 1
•
LENGTH: 2.20 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 PIN
•
SUPPLEMENTARY FEATURES: SEE TECH DATA SHEET 62 COMPRESSION LATCH ON WEBSITE WWW.SOUTHCO.COM/62 FOR ADDITIONAL INFORMATION
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH3.35 INCHES NOMINAL IN
ACTION TYPESPRING
MOUNTING HOLE QUANTITY1
LENGTH2.20 INCHES NOMINAL IN
END ITEM IDENTIFICATIONCONSOLE GSE
MATERIALSTEEL COMP 303 PIN
SUPPLEMENTARY FEATURESSEE TECH DATA SHEET 62 COMPRESSION LATCH ON WEBSITE WWW.SOUTHCO.COM/62 FOR ADDITIONAL INFORMATION
MATERIALZINC HOUSING
SPECIAL FEATURESPOLISHED CHROME OVERALL
STYLE DESIGNATORRECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2-13-18Interchangeable
interchangeable cross-reference
interchangeable
18CInterchangeable
interchangeable cross-reference
interchangeable
10134-3002Interchangeable
interchangeable cross-reference
interchangeable
AND10134-3002Interchangeable
interchangeable cross-reference
interchangeable
21318DInterchangeable
interchangeable cross-reference
interchangeable
4000-22850 ITEM 7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 62-40-211-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62-40-211-2?
62-40-211-2 is a LATCH,RIM.
What parts can replace 62-40-211-2?
There are 10 known substitutes for 62-40-211-2: 2-13-18, 18C, 10134-3002 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62-40-211-2?
62-40-211-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-522-7349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62-40-211-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026