PartsTable
Technical Data Sheet
Download PDF

62-274-0 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

62-274-0: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_style: RECTANGULAR, body_width: 0.312 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.312 INCHES NOMINAL IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-250-1208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 62-274-0
NSN: 5331-00-250-1208
NIINs: 002501208, 010427521
FSC: 5331 — O-ring
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_styleRECTANGULAR
body_width0.312 INCHES NOMINAL IN
body_height0.375 INCHES NOMINAL IN
body_length0.312 INCHES NOMINAL IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
mounting_methodTERMINAL
terminal_length0.250 INCHES MINIMUM IN
fragility_factorMODERATELY DELICATE
section_quantity1
features_providedHUMIDITY PROOF
precious_materialGOLD
NSN5331-00-250-1208
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 62-274-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
32239Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SG3918PC25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1820-40Reference document
Same NSN cross-reference
Reference document — Secondary reference
SD6294Reference document
Same NSN cross-reference
Reference document — Secondary reference
11-337Reference document
Same NSN cross-reference
Reference document — Secondary reference
27-40Same NSN cross-reference
IBM PCI RAID Disk Controller
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 62-274-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62-274-0?
62-274-0 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 62-274-0?
There are 8 known substitutes for 62-274-0: 32239, SG3918PC25, 1820-40 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62-274-0?
62-274-0 is cataloged in the U.S. Government catalog under NSN 5331-00-250-1208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62-274-0