PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6198566
6198566 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,ECCENTRIC is a the manufacturer industrial component. Key specifications include height: 0.218 INCHES NOMINAL IN, material: STEEL COMP 1035 OVERALL, head_style: FLAT CHAMFER, overall_length: 2.406 INCHES NOMINAL IN, pin_head_diameter: 0.807 INCHES MINIMUM AND 0.811 INCHES MAXIMUM IN, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-619-8566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6198566
NSN: 5315-00-619-8566
FSC: 5315
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
height0.218 INCHES NOMINAL IN
materialSTEEL COMP 1035 OVERALL
head_styleFLAT CHAMFER
overall_length2.406 INCHES NOMINAL IN
pin_head_diameter0.807 INCHES MINIMUM AND 0.811 INCHES MAXIMUM IN
surface_treatmentZINC OVERALL
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
numeric_designation_of_step_eccentric_to_head3 AND 4 AND 5 AND 6
NSN5315-00-619-8566
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6198566 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1035 OVERALL
•
HEAD STYLE: FLAT CHAMFER
•
PIN HEAD DIAMETER: 0.807 INCHES MINIMUM AND 0.811 INCHES MAXIMUM IN
•
HEIGHT: 0.218 INCHES NOMINAL IN
•
NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD: 3 AND 4 AND 5 AND 6
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1035 OVERALL
OVERALL LENGTH2.406 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
PIN HEAD DIAMETER0.807 INCHES MINIMUM AND 0.811 INCHES MAXIMUM IN
HEIGHT0.218 INCHES NOMINAL IN
NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD3 AND 4 AND 5 AND 6
SURFACE TREATMENTZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
AS4842/1Interchangeable
interchangeable cross-reference
interchangeable
AN816-4Interchangeable
interchangeable cross-reference
interchangeable
476 686Interchangeable
interchangeable cross-reference
interchangeable
RAS2000-4CADInterchangeable
interchangeable cross-reference
interchangeable
J514 4-4 070221CAInterchangeable
interchangeable cross-reference
interchangeable
24044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6198566?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6198566?
6198566 is a PIN,ECCENTRIC.
What parts can replace 6198566?
There are 19 known substitutes for 6198566: AS4842/1, AN816-4, 476 686 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6198566?
6198566 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-619-8566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6198566

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026