6196556: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.308 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, fastener_length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-366-2605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | PAN |
| head_height | 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| thread_class | 2A A |
| head_diameter | 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN |
| thread_length | 0.308 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| fastener_length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.086 INCHES IN |
| screw_surface_treatment | PASSIVATE |
| minimum_tensile_strength | 80000 POUNDS PER SQUARE INCH LBS |
| thread_quantity_per_inch | 56 |
| NSN | 5305-01-366-2605 |
| HEAD HEIGHT | 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| SCREW SURFACE TREATMENT | PASSIVATE |
| FASTENER LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| THREAD LENGTH | 0.308 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.086 INCHES IN |
| HEAD STYLE | PAN |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH LBS |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
No substitute or cross-reference records for this part.