PartsTable
Technical Data Sheet
Download PDF

61917.C3 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

61917.C3: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 3.3457 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN, overall_width: 0.7007 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-089-1618, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61917.C3
NSN: 3110-01-089-1618
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter3.3457 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
overall_width0.7007 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedMOUNTING GROOVE
lubrication_materialGREASE
overall_outside_diameter4.7238 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.1
lubrication_material_document_and_classificationMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-089-1618
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 61917.C3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 4.7238 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
•
FEATURES PROVIDED: MOUNTING GROOVE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.7007 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER4.7238 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
FEATURES PROVIDEDMOUNTING GROOVE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER3.3457 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
11669551Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1917-SReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 61917.C3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61917.C3?
61917.C3 is a BEARING,BALL,ANNULAR.
What parts can replace 61917.C3?
There are 2 known substitutes for 61917.C3: 11669551, 1917-S. Substitute compatibility should be verified for your specific system.
What is the NSN for 61917.C3?
61917.C3 is cataloged in the U.S. Government catalog under NSN 3110-01-089-1618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61917.C3