PartsTable
Technical Data Sheet
Download PDF

6189-1C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6189-1C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.483 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-133-8888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6189-1C
NSN: 5340-01-133-8888
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.483 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-133-8888
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6189-1C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 172 OVERALL
•
HOLE DIAMETER: 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.483 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 172 OVERALL
HOLE DIAMETER0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6189-1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6189-1C?
6189-1C is a CLIP,SPRING TENSION.
What is the NSN for 6189-1C?
6189-1C is cataloged in the U.S. Government catalog under NSN 5340-01-133-8888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6189-1C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.