PartsTable
Technical Data Sheet
PartsTable / MRO / 6187-4
6187-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN, body_height: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN, body_length: 1.000 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, cubic_measure: 0.317 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-665-9774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6187-4
NSN: 5998-01-665-9774
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 61802 — TOSHIBA INTERNATIONAL CORPORATION DBA TOSHIBA INTERNATIONAL CORP (USA)
SPECIFICATIONS
body_width0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
body_height0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
body_length1.000 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
cubic_measure0.317 CUBIC INCHES
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
terminal_width0.140 INCHES MINIMUM IN
terminal_length0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
style_designatorAXIAL TERMINAL (S)
mounting_hole_size0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
electrical_resistance0.750 OHMS
reliability_indicatorESTABLISHED
NSN5998-01-665-9774
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 6187-4 MFR RESISTOR,FIXED,WIRE WOUND,INDUCT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
13-1032Interchangeable
interchangeable cross-reference
interchangeable
FF-S-85 TY2ST10PGR5Interchangeable
interchangeable cross-reference
interchangeable
MS90725-164Interchangeable
interchangeable cross-reference
interchangeable
18720Interchangeable
interchangeable cross-reference
interchangeable
91D1243Interchangeable
interchangeable cross-reference
interchangeable
61874-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 6187-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6187-4?
6187-4 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6187-4?
There are 11 known substitutes for 6187-4: 13-1032, FF-S-85 TY2ST10PGR5, MS90725-164 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6187-4?
6187-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-665-9774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6187-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026