PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 61835A2 ITEM 7
61835A2 ITEM 7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: GRAPHITE INTERNAL, end_item_identification: 2 SWING CHECK VALVE, material_document_and_classification: 316/GRAPHITE FILLED MFR REF SINGLE MATERIAL RESPONSE EXTERNAL, part_name_assigned_by_controlling_agency: SPIRAL WOUND GASKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-615-0686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61835A2 ITEM 7
NSN: 5330-01-615-0686
FSC: 5330
CAGE: 63220 — FLOWSERVE INC (USA)
SPECIFICATIONS
materialGRAPHITE INTERNAL
end_item_identification2 SWING CHECK VALVE
material_document_and_classification316/GRAPHITE FILLED MFR REF SINGLE MATERIAL RESPONSE EXTERNAL
part_name_assigned_by_controlling_agencySPIRAL WOUND GASKET
NSN5330-01-615-0686
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 61835A2 ITEM 7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: GRAPHITE INTERNAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 316/GRAPHITE FILLED MFR REF SINGLE MATERIAL RESPONSE INTERNAL
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYSPIRAL WOUND GASKET
END ITEM IDENTIFICATION2 SWING CHECK VALVE
MATERIALGRAPHITE INTERNAL
MATERIALSTEEL EXTERNAL
MATERIAL DOCUMENT AND CLASSIFICATION316/GRAPHITE FILLED MFR REF SINGLE MATERIAL RESPONSE INTERNAL
MATERIAL DOCUMENT AND CLASSIFICATION316/GRAPHITE FILLED MFR REF SINGLE MATERIAL RESPONSE EXTERNAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
144303Interchangeable
interchangeable cross-reference
interchangeable
41X2Interchangeable
interchangeable cross-reference
interchangeable
55018Interchangeable
interchangeable cross-reference
interchangeable
10-001-1Interchangeable
interchangeable cross-reference
interchangeable
04207Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61835A2 ITEM 7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61835A2 ITEM 7?
61835A2 ITEM 7 is a GASKET.
What parts can replace 61835A2 ITEM 7?
There are 14 known substitutes for 61835A2 ITEM 7: SAE-J512, 144303, 41X2 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 61835A2 ITEM 7?
61835A2 ITEM 7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-615-0686. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61835A2 ITEM 7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026