PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6182-1
6182-1 ✓ Verified by PartsTable
Indesit · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a Indesit industrial component. Key specifications include end_item_identification: MODERN MFG CO. INC.

MODEL SN-40 AND SN-41 NIBBLERS, general_characteristics_item_description: FOR STAINLESS STEEL. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-089-6103, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6182-1
NSN: 3120-01-089-6103
FSC: 3120
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
end_item_identificationMODERN MFG CO. INC. MODEL SN-40 AND SN-41 NIBBLERS
general_characteristics_item_descriptionFOR STAINLESS STEEL
NSN3120-01-089-6103
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 6182-1 · Indesit ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 1.4220 INCHES MINIMUM AND 1.4240 INCHES MAXIMUM IN
•
OVERALL THICKNESS: 0.2660 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.8070 INCHES MINIMUM AND 1.8090 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE FINISH: 16.0 MICROINCHES INNER MEMBER
•
STYLE DESIGNATOR: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER1.4220 INCHES MINIMUM AND 1.4240 INCHES MAXIMUM IN
OVERALL THICKNESS0.2660 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.8070 INCHES MINIMUM AND 1.8090 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
SURFACE FINISH16.0 MICROINCHES INNER MEMBER
STYLE DESIGNATORROUND
MATERIALCOPPER ALLOY OVERALL
SURFACE FINISH32.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH16.0 MICROINCHES LEFT SIDE
SURFACE FINISH16.0 MICROINCHES RIGHT SIDE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
009200029Interchangeable
interchangeable cross-reference
interchangeable
13329Interchangeable
interchangeable cross-reference
interchangeable
61821Interchangeable
interchangeable cross-reference
interchangeable
A15170-30Interchangeable
interchangeable cross-reference
interchangeable
11B5190582-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6182-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6182-1?
6182-1 is a BEARING,BALL,ANNULAR manufactured by Indesit.
What parts can replace 6182-1?
There are 5 known substitutes for 6182-1: 009200029, 13329, 61821 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6182-1?
6182-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-089-6103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6182-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026