PartsTable
Technical Data Sheet
Download PDF

6176-1C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6176-1C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN, length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, overall_height: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), features_provided: CUSHION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-064-3569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6176-1C
NSN: 5340-01-064-3569
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
overall_height1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
features_providedCUSHION
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
loop/holding_dimension1.370 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.812 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-064-3569
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6176-1C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 1.370 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CUSHION
•
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN
LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION1.370 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
FEATURES PROVIDEDCUSHION
MATERIAL THICKNESS0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.812 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6176-1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6176-1C?
6176-1C is a CLIP,SPRING TENSION.
What is the NSN for 6176-1C?
6176-1C is cataloged in the U.S. Government catalog under NSN 5340-01-064-3569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6176-1C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.