PartsTable / COMPONENT / 61730
61730
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL COMP 416 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.380 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-298-0499, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
61730
NSN: 5330-00-298-0499 FSC: 5330 CAGE: 11406 — REXNORD HOLDINGS INC (USA)
SPECIFICATIONS
material STEEL COMP 416 OVERALL body_style PLAIN, SOLID bore_style PLAIN BOTH ENDS tooth_form STANDARD hole_diameter 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 1.380 INCHES NOMINAL IN terminal_type TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING overall_length 6.750 INCHES NOMINAL IN pitch_diameter 0.6370 INCHES NOMINAL IN pressure_angle 14.5000 DEGREES teeth_quantity 20 insert_material PLASTIC PHENOLIC SINGLE MATING END NSN 5330-00-298-0499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 61730
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: CIRCULAR
• BOLT CIRCLE DIAMETER: 5.750 INCHES NOMINAL IN
• MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
• APERTURE DIAMETER: 5.094 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 6.375 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR CIRCULAR BOLT CIRCLE DIAMETER 5.750 INCHES NOMINAL IN MATERIAL PAPER AND GLUE AND GLYCERIN OVERALL APERTURE DIAMETER 5.094 INCHES NOMINAL IN BOLT HOLE QUANTITY 6 OUTSIDE DIAMETER 6.375 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL DOCUMENT AND CLASSIFICATION HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL HOLE DIAMETER 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A61730 Interchangeable interchangeable cross-reference
interchangeable
61730 Interchangeable interchangeable cross-reference
interchangeable
DM-495 Interchangeable interchangeable cross-reference
interchangeable
C1060 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 61730?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61730?
61730 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 61730?
There are 4 known substitutes for 61730: A61730, 61730, DM-495 and 1 more. Substitute compatibility should be verified for your specific system.
Is 61730 still available?
61730 is currently cancelled.