PartsTable
Technical Data Sheet
Download PDF

617089-100 — STUFFING TUBE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

617089-100: STUFFING TUBE.

The STUFFING TUBE is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM, material: ALUMINUM ALLOY 6061 OVERALL, surface_treatment: ANODIZE OVERALL, peripheral_diameter: 1.850 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN, center_hole_diameter: 1.270 INCHES MINIMUM AND 1.275 INCHES MAXIMUM IN, cross-sectional_shape_style: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-185-0661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
617089-100
NSN: 5330-00-185-0661
NIINs: 001850661, 010943286
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
angle90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
materialALUMINUM ALLOY 6061 OVERALL
surface_treatmentANODIZE OVERALL
peripheral_diameter1.850 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
center_hole_diameter1.270 INCHES MINIMUM AND 1.275 INCHES MAXIMUM IN
cross-sectional_shape_styleANGLE
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR WW-T-789 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
surface_treatment_document_and_classificationQQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-00-185-0661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 617089-100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR WW-T-789 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
ANGLE: 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 1.850 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
CENTER HOLE DIAMETER: 1.270 INCHES MINIMUM AND 1.275 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR WW-T-789 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
CROSS-SECTIONAL SHAPE STYLEANGLE
ANGLE90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER1.850 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
CENTER HOLE DIAMETER1.270 INCHES MINIMUM AND 1.275 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 6061 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
AN6229-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 617089-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 617089-100?
617089-100 is a STUFFING TUBE.
What parts can replace 617089-100?
There is 1 known substitute for 617089-100: AN6229-25. Substitute compatibility should be verified for your specific system.
What is the NSN for 617089-100?
617089-100 is cataloged in the U.S. Government catalog under NSN 5330-00-185-0661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 617089-100

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.