PartsTable
Technical Data Sheet
Download PDF

61641 — BOLT,TEE HEAD

✓ Government record, cited
InLine · BOLT SCREW
PRODUCT OVERVIEW

61641: BOLT,TEE HEAD.

The CAT5 DVI KVM Extender Over LAN with Audio, Microphone, separated Hub, & Local Console is not the typical KVM Extender but specially design for use with DVI USB KVM. Normal USB KVMs have a console along with USB device ports and needs to have separated hub to keep both the console hotkey functionality and USB 2.0 device performance. 61641 Transmitter also have console for convenience usage at both locations.

Applicable MIS center, Data center, or Off-site storage facilities. This part is cataloged in the U.S. Government catalog under NSN 5306-00-011-2647, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
61641
NSN: 5306-00-011-2647
FSC: 5306 — Bolts
CAGE: 92215 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND W/WRENCH FLATS
head_height0.201 INCHES NOMINAL IN
thread_class2A A
head_diameter0.488 INCHES NOMINAL IN
thread_length0.804 INCHES NOMINAL IN
special_featuresSUPPLY WITH HOLE IN HEAD
thread_directionRIGHT-HAND
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5306-00-011-2647
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 61641 · InLine ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.201 INCHES NOMINAL IN
•
THREAD LENGTH: 0.804 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: ROUND W/WRENCH FLATS
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.201 INCHES NOMINAL IN
THREAD LENGTH0.804 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEROUND W/WRENCH FLATS
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESSUPPLY WITH HOLE IN HEAD
THREAD CLASS2A A
THREAD QUANTITY PER INCH18
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 1
616141Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 61641?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61641?
61641 is a BOLT,TEE HEAD manufactured by InLine.
What parts can replace 61641?
There is 1 known substitute for 61641: 616141. Substitute compatibility should be verified for your specific system.
What is the NSN for 61641?
61641 is cataloged in the U.S. Government catalog under NSN 5306-00-011-2647. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61641