PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 61505D
61505D ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 0.4357 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM IN, overall_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0348, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61505D
NSN: 3110-00-157-0348
FSC: 3110
CAGE: 29930 — INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter0.4357 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM IN
overall_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4800 INCHES NOMINAL IN
outer_ring_width0.4600 INCHES NOMINAL IN
special_featuresECCENTRICITY 0.0003 IN. ON INNER RING,0.0006 IN. ON OUTER RING IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
NSN3110-00-157-0348
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 61505D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0030 INCHES MINIMUM AXIAL AND 0.0050 INCHES MAXIMUM AXIAL IN
•
BEARING SEAL TYPE: CONTACT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
INTERNAL CLEARANCE0.0030 INCHES MINIMUM AXIAL AND 0.0050 INCHES MAXIMUM AXIAL IN
BEARING SEAL TYPECONTACT
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FS434Interchangeable
interchangeable cross-reference
interchangeable
943-7791Interchangeable
interchangeable cross-reference
interchangeable
814-23Interchangeable
interchangeable cross-reference
interchangeable
0LK511Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61505D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61505D?
61505D is a BEARING,BALL,ANNULAR.
What parts can replace 61505D?
There are 4 known substitutes for 61505D: FS434, 943-7791, 814-23 and 1 more. Substitute compatibility should be verified for your specific system.
Is 61505D still available?
61505D is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61505D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026