PartsTable
Technical Data Sheet
Download PDF

614684 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

614684: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 121.0 DEGREES NOMINAL, style_designator: ANGLE, surface_treatment: CADMIUM, mounting_hole_type: PLAIN, first_leg_thickness: 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-403-3111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
614684
NSN: 5340-00-403-3111
FSC: 5340 — Hardware, Commercial
CAGE: 34830 — ROGERSON KRATOS (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle121.0 DEGREES NOMINAL
style_designatorANGLE
surface_treatmentCADMIUM
mounting_hole_typePLAIN
first_leg_thickness0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
first_leg_hole_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
second_leg_hole_diameter0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_hole_arrangement_styleTHREE HOLES
material_document_and_classificationAMS 5504 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-403-3111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 614684 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 121.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.900 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE121.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.900 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 614684?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 614684?
614684 is a BRACKET,ANGLE.
What is the NSN for 614684?
614684 is cataloged in the U.S. Government catalog under NSN 5340-00-403-3111. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 614684

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.