PartsTable
Technical Data Sheet
614519 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RECTIFIER,METALLIC is a the manufacturer industrial component. Key specifications include material: SELENIUM, case_style: SQUARE, seal_width: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, temp_rating: -40.0 CELSIUS AND 65.0 CELSIUS DEGC, overall_width: 1.094 INCHES NOMINAL IN, terminal_type: WIRE LEAD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-0991, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
614519
NSN: 5330-00-641-0991
FSC: 5330
CAGE: 0EXU3 — AQUA-CHEM, INC. DBA AQUA-CHEM INC (USA)
SPECIFICATIONS
materialSELENIUM
case_styleSQUARE
seal_width0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
temp_rating-40.0 CELSIUS AND 65.0 CELSIUS DEGC
overall_width1.094 INCHES NOMINAL IN
terminal_typeWIRE LEAD
overall_height0.516 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
terminal_quantity2
housing_bore_diameter2.623 INCHES NOMINAL IN
output_voltage_rating440.0 DC VOLTS MAXIMUM
sealing_element_styleANGULAR
NSN5330-00-641-0991
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 614519 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL CASE
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
SEAL WIDTH: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
CASE STYLE: SQUARE
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
SEAL WIDTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
6064-1Interchangeable
interchangeable cross-reference
interchangeable
S6132-80205Interchangeable
interchangeable cross-reference
interchangeable
51176Interchangeable
interchangeable cross-reference
interchangeable
MIL-D-4562Interchangeable
interchangeable cross-reference
interchangeable
A-A-50695Interchangeable
interchangeable cross-reference
interchangeable
51376Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 614519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 614519?
614519 is a RECTIFIER,METALLIC.
What parts can replace 614519?
There are 15 known substitutes for 614519: 6064-1, S6132-80205, 51176 and 12 more. Substitute compatibility should be verified for your specific system.
Is 614519 still available?
614519 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 614519