PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 613947
613947 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C BALL, bore_diameter: 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, overall_length: 3.3755 INCHES MINIMUM AND 3.4995 INCHES MAXIMUM IN, inner_ring_width: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, outer_ring_width: 0.3220 INCHES MINIMUM AND 0.3320 INCHES MAXIMUM IN, style_designator: SINGLE ROW, BALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-388-5735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
613947
NSN: 3110-01-388-5735
FSC: 3110
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 440C BALL
bore_diameter0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
overall_length3.3755 INCHES MINIMUM AND 3.4995 INCHES MAXIMUM IN
inner_ring_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_ring_width0.3220 INCHES MINIMUM AND 0.3320 INCHES MAXIMUM IN
style_designatorSINGLE ROW, BALL
overall_outside_diameter0.8750 INCHES NOMINAL IN
length_from_bore_center_to_shank_end2.9380 INCHES MINIMUM AND 3.0620 INCHES MAXIMUM IN
NSN3110-01-388-5735
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 613947 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE ROW, BALL
•
MATERIAL: STEEL COMP 440C BALL
•
INNER RING WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE ROW, BALL
MATERIALSTEEL COMP 440C BALL
MATERIALSTEEL COMP 630 OUTER RACE
INNER RING WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
OVERALL LENGTH3.3755 INCHES MINIMUM AND 3.4995 INCHES MAXIMUM IN
BORE DIAMETER0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
MATERIALSTEEL COMP 630 ROD END BODY
MATERIALSTEEL COMP 630 INNER RACE
LENGTH FROM BORE CENTER TO SHANK END2.9380 INCHES MINIMUM AND 3.0620 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
711-114Interchangeable
interchangeable cross-reference
interchangeable
5629Interchangeable
interchangeable cross-reference
interchangeable
711115Interchangeable
interchangeable cross-reference
interchangeable
73-111-4Interchangeable
interchangeable cross-reference
interchangeable
527573Interchangeable
interchangeable cross-reference
interchangeable
1B7297Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 613947?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 613947?
613947 is a BEARING,BALL,ROD END.
What parts can replace 613947?
There are 6 known substitutes for 613947: 711-114, 5629, 711115 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 613947?
613947 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-388-5735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 613947

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026