PartsTable
Technical Data Sheet
Download PDF

6137-09-151-8102 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6137-09-151-8102: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, inner_groove_depth: 0.176 INCHES NOMINAL IN, inner_groove_width: 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, outer_groove_depth: 0.170 INCHES NOMINAL IN, outer_groove_width: 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, peripheral_diameter: 2.109 INCHES MINIMUM AND 2.111 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-032-1205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6137-09-151-8102
NSN: 5330-01-032-1205
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
inner_groove_depth0.176 INCHES NOMINAL IN
inner_groove_width0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
outer_groove_depth0.170 INCHES NOMINAL IN
outer_groove_width0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
peripheral_diameter2.109 INCHES MINIMUM AND 2.111 INCHES MAXIMUM IN
center_hole_diameter1.384 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN
cross-sectional_height0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
cross-sectional_shape_styleH CHANNEL FLAT SIDES
NSN5330-01-032-1205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6137-09-151-8102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.170 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
INNER GROOVE DEPTH: 0.176 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: H CHANNEL FLAT SIDES
•
PERIPHERAL DIAMETER: 2.109 INCHES MINIMUM AND 2.111 INCHES MAXIMUM IN
•
OUTER GROOVE WIDTH: 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
•
INNER GROOVE WIDTH: 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.384 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.170 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
INNER GROOVE DEPTH0.176 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEH CHANNEL FLAT SIDES
PERIPHERAL DIAMETER2.109 INCHES MINIMUM AND 2.111 INCHES MAXIMUM IN
OUTER GROOVE WIDTH0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
INNER GROOVE WIDTH0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.384 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6137-09-151-8102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6137-09-151-8102?
6137-09-151-8102 is a PACKING,PREFORMED.
What is the NSN for 6137-09-151-8102?
6137-09-151-8102 is cataloged in the U.S. Government catalog under NSN 5330-01-032-1205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6137-09-151-8102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.