PartsTable
Technical Data Sheet
Download PDF

61362PC880 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

61362PC880: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 3.3461 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN, overall_width: 1.0974 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-2210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61362PC880
NSN: 3110-00-198-2210
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 65177 — PATTERSON PUMP CO DIV PATTERSON PUMP COMPANY (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter3.3461 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
overall_width1.0974 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter5.9005 INCHES MINIMUM AND 5.9025 INCHES MAXIMUM IN
bearing_preload_designationLIGHT
retainer_fabrication_methodMACHINED
NSN3110-00-198-2210
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 61362PC880 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 5.9005 INCHES MINIMUM AND 5.9025 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 3.3461 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH1.0974 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER5.9005 INCHES MINIMUM AND 5.9025 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
BORE DIAMETER3.3461 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
SUBSTITUTES & CROSS-REFERENCES 2
SK7141Reference document
Same NSN cross-reference
Reference document — Secondary reference
61361PC798Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 61362PC880?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61362PC880?
61362PC880 is a BEARING,BALL,DUPLEX.
What parts can replace 61362PC880?
There are 2 known substitutes for 61362PC880: SK7141, 61361PC798. Substitute compatibility should be verified for your specific system.
What is the NSN for 61362PC880?
61362PC880 is cataloged in the U.S. Government catalog under NSN 3110-00-198-2210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61362PC880

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.