PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 61344A
61344A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL COMP 16R1 OVERALL, hole_diameter: 0.156 INCHES NOMINAL IN, outside_diameter: 1.250 INCHES NOMINAL IN, aperture_diameter: 0.250 INCHES NOMINAL IN, bolt_circle_diameter: 0.875 INCHES NOMINAL IN, cross-sectional_width: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-776-2693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61344A
NSN: 5330-00-776-2693
FSC: 5330
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
materialWOOL COMP 16R1 OVERALL
hole_diameter0.156 INCHES NOMINAL IN
outside_diameter1.250 INCHES NOMINAL IN
special_featuresSPLIT RADIALLY FROM ID TO OD ONE SIDE BOLT HOLES SPACED 90 DEGREES APART ON 0.438 IN. RADIUS AND TWO IDENTICAL FELTS IMMERSED IN OIL IN
aperture_diameter0.250 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter0.875 INCHES NOMINAL IN
cross-sectional_width0.500 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
material_document_and_classificationC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-776-2693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 61344A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: WOOL COMP 16R1 OVERALL
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 0.875 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALWOOL COMP 16R1 OVERALL
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.156 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER0.875 INCHES NOMINAL IN
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
APERTURE DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESSPLIT RADIALLY FROM ID TO OD ONE SIDE BOLT HOLES SPACED 90 DEGREES APART ON 0.438 IN. RADIUS AND TWO IDENTICAL FELTS IMMERSED IN OIL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
E95043Interchangeable
interchangeable cross-reference
interchangeable
61344Interchangeable
interchangeable cross-reference
interchangeable
1EB7Interchangeable
interchangeable cross-reference
interchangeable
RM146-33Interchangeable
interchangeable cross-reference
interchangeable
53X2901Interchangeable
interchangeable cross-reference
interchangeable
613144Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61344A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61344A?
61344A is a FELT,MECHANICAL,PREFORMED.
What parts can replace 61344A?
There are 6 known substitutes for 61344A: E95043, 61344, 1EB7 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 61344A?
61344A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-776-2693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61344A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026